food-banner

Pickled Gherkin Crunchiness


 

If you want to know the crunchiness of a pickle: bite it. Expert testers are relied on throughout the food industry, but can you objectively quantify crunchiness, and use this to assure product consistency, or improve manufacture? Different preparations can also be compared for measurable degrees of crunchiness.

pickles

Method


A Food Technology Corporation's (FTC) TMS-Pro texture analyser was used, fitted with a 500 N intelligent loadcell and a TMS lightweight blade set. This fixture features two blades with four different cutting edges. The large v-notched blade was chosen as being most suitable for the product being tested.

The TL-Pro test program was written to slice through each sample pickled gherkin (dill cucumber) at a speed of 250 mm/min to a distance far enough to cut it through completely. Due to the variable nature of the product, several cuts were made in each pickle so as to gain a better overall picture of the product. On completion of the test, the TL Pro graphical data and calculations on the sample were examined.

pickles-testing

Results


The two traces shown are a representative sample from the control group and the "crunchiest" sample from the sea salt group.

The same results with additional calculations are shown here.

  • Crunch factor = firmness x work
  • Average = arithmetic mean
  • SD = standard deviation
  • CV = coefficient of variation: (SD/Mean) x 100
graph-pickles
sample-testing-pickles

Benefit


It can be seen from the data that the signatures of the normal salt (control) product and the sea salt product are clearly distinguishable. The "crunch factor" is derived from measures of both firmness and work done to achieve the full cut, and a sharper peak in the graph shows a crisper snap. In fact over multiple samples, there is also greater consistency (CV) in the sea salt preparation than in the control sample.

By establishing data profiles in this way for the subjective assessment (bite) of quality-approved sample products, an objective comparator can be used in the texture analyser for accurate and repeatable mechanized production line testing. New formulations can also be tested that improve consistency or shelf life, based on expert sensory assessment but objectively measurable.

Get In Touch


If you have a query about an instrument, service or application please do not hesitate to contact our friendly and knowledgeable team.

You can reach us on +44(0) 113 286 4536[email protected] or fill in a contact form.